Step 1: connect your monitor to your computer, Connecting to an ibm pc/at or compatible computer, Connecting to a macintosh or compatible computer – Sony CPD-110GS User Manual
Page 6: Step 2: connect the power cord, Step 3:turn on the monitor and computer, Step 2; connect the power cord, Step 3: turn on the monitor and computer, Setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setup
Before using your monitor, check that the following accessones
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
■
• Warranty card (1)
• Notes on cleaning the screen s surface (1)
• This instruction manual
1
1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
■ Connecting to an IBM PC/AT or compatible
computer
IBM PC/AT or
compatible computer
■ Connecting to a Macintosh or compatible
computer
You will need a Macintosh adapter (not supplied).
Step 2: Connect the power cord
With the monitor and computer switched off. first connect the
power cord to the monitor, then connect it to a power outlet.
Step 3:Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picmre.
Macintosh or
to video
compatible computer output