Sony CPD-110GS - Manual (Page 15)

Seif-diagnosis function
This monitor is equipped with a sell-diagnosis function, if there is
a problem with your monitor or computer, the screen will go
blank and the (1) (power) indicator will either light up green or
Hash orange. If the (1) (power) indicator is lit in orange, the
computer is in power saving mode. Tr^ pressing any key on the
keyboard.
3
(power) indicator
If the (power) indicator is green
1 Disconnect the video input cable, or turn off the
connected computer.
2 Press the Cl) (power) button to turn the monitor off
and on.
3 Press and hold the -i- button for 2 seconds before the
monitor enters power saving mode.
If all three color bars appear (red. green, blue), the monitor is
working properly. Reconnect the video input cables and check the
condition of your computer.
If the color bars do not appear, there is a potential monitor failure.
' inform your authorized Sony dealer of the monitor s condition.
If the c!) (power) indicator is flashing orange
Press the (!) (power) button to turn the monitor off and
on.
If the (!) (power) indicator lights up green, the monitor is working
properly.
If the (!) (power) Indicator is still flashing, there is a potential
monitor failure. Count the number of seconds between orange
flashes of the (!) (power) indicator and inform your authorized
Sony dealer of the monitor's condition. Be sure to note the model
name and serial number of your monitor. Also note the make and
model of your computer and video board.
Specifications
CPD-110GS
CRT 0.25 mm aperture grille pitch
Viewable image size
15 inches measured diagonally
90-degree deflection
Approx. 285 x 2 l 4 mm (w/h)
Resolution
(II * / 4 x 8 ’/2 inches)
14.0" viewing image
Horizontal: Max. 1280 dots
Standard image area
Vertical: Max. 1024 lines
Approx. 270 X 202 mm (w/h)
Deflection frequency*
( 10 ^4 X 8 inches)
Horizontal: 30 to 70 kHz
AC input voltage/current
Venical: 48 to 120 Hz
100 to 240 V.50-60 Hz. 1.6-0.8 A
Power consumption Max. 105 W
Dimensions Approx. 368 X 393 X 389 mm (w/h/d)
Mass
( 14 ‘/2 X 15 ‘/2 X 15 -Vs inches)
Approx. 14 kg (30 lb 14 oz)
Plug and Play DDC1/DDC2B
Supplied accessories See page 6
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 psec.
• Horizontal blanking width should be more than 3.6 psec.
• Vertical blanking width should be more than 5(X) psec.
CPD-210GS
CRT 0.25 mm aperture grille pitch
Viewable image size
1 7 inches measured diagonally
90-degree deflection
Approx. 327 X 243 mm (w/h)
Resolution
(12^/8 X 9 ^/8 inches)
16.0" viewing image
Horizontal; Max. 1280 dots
Standard image area
Vertical: Max. 1024 lines
Approx. 312 X 234 mm (w/h)
Deflection frequency*
(12^/8 X 9 */4 inches)
Horizontal: 30 to 70 kHz
AC input voltage/current
Vertical: 48 to 120 Hz
100 to 240 V, 50 - 60 Hz. 1.7 - 0.9 A
Power consumption Max. HOW
Dimensions Approx. 406 X 431.5 X 420 mm (w/h/d)
Mass
(16 X 17 X 16^/8 inches)
Approx. 18.5 kg (40 lb 13 oz)
Plug and Play DDCI/DDC2B
Supplied accessones See page 6
Recommended honzontal and vertical timing condition
• Horizontal sync width should be more than 1.0 psec.
• Horizontal blanking width should be more than 3.0 psec.
• Vertical blanking width should be more than 500 psec.
Design and specifications are subject to change without notice.
1R