Adjusting the picture contrast – Sony CPD-220VS User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The VOLUME/CONTRAST OSD disappears 3 seconds after you release
the buttons.
^ Tips
• The default setting of the volume level is 30 %.
• Adjust the volume while listening to the sound.
• Excessively high volume may cause howling.
■ To mute the sound
Press the button. The indicator lights. The light indicates mute
function is in active mode.
Press again to cancel muting.
You can cancel muting also by pressing the ^ + button.
Tip
“Y appears instead of ^ on the VOLUME/CONTRAST OSD while the sound is muted.
Adjusting the picture contrast
The adjustment data becomes the common setting for all input signals.
1. Press the 3 + or - button.
The VOLUME/CONTRAST OSD appears.
The horizontal and vertical frequencies for each input signal received
appear.
*
VOLUME
^--------------------------
1
CONTRAST
□ 50
0
D
100
Q
46.9KHZ/75HZ
^
0
Adjustments