Connecting the system, Connecting speaker systems – Sony STR-GX49ES User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the System
Connecting Speaker Systems
Speaker (R)
T
n
A“
0 0 0 0
0000
^ t -t -i
I
to the second
speaker system
r
* \
1
2
3
15 mm
m
)
Speaker (L)
e
|0
0]e
Receiver
0
©
0
©
© 0 © ©
Set the SPEAKER IMPEDANCE SELECTOR according to the
impedance of the used speakers, using a screwdriver.
CAUTION
When you operate two speaker systems simultaneously, be
sure to use the speakers with the impedance of more
than 8 ohms and set the SPEAKER IMPEDANCE SELECTOR to
4-60.
Note
Once the speakers have been connected, move
SPEAKERS selector (on the front panel) to A, B or A + B
setting.
When using the headphones, set the SPEAKERS
selector to OFF.
Speaker impedance and power capability
This receiver is designed to work best with speakers having
nominal impedance from 4 to 16 ohms at rated 50 watts RMS per
channel with an 8 ohms load from 20 — 20,0(X) Hz.
8