Installation, Step 1: connect the computer – Sony CPD-101VS User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
■ step 1: Connect the computer
With the computer switched off, connect the video signal cable to the
display (VGA) connector on your computer. If your computer supports
the DDC plug-and-play standard, this connection will enable DDC
communication between the display and the computer.
The video signal cable is combined with audio and microphone cables.
If your computer is equipped with soimd capability, connect the audio
(green) and microphone (red) plugs to appropriate jacks located on your
computer.
Note on handling the video signal cable
Do not touch the pins of the video signal cable.
12
Getting Started