Parts identification, Turntable assembly – Sony PS-LX2 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PARTS IDENTIFICATION
The picture below shows the appearance of the assembled turntable.
45-rpm Adaptor
Disc Centering Guides
Center Spindle
Rubber Mat
SPEED Selector
^Counterweight
'Tracking Force Ring
Cueing Platform
Anti-skating Compensator
Arm Rest
Locking Collar
Cartridge Shell
-Up/Down Button[i/V_]
'REJECT Button
■ SERVO LOCK Indicator
TURNTABLE ASSEMBLY
Do not connect the power cord or the connecting cords until the
turntable has been completely assembled.
Remove all packing material and wipe the cabinet off.
Save the packing box and materials for possible future use.
The numbers in the illustration refer to the sequence of assembly.
O
Keep the metallic parts indicated by the arrows in the illustration
inside the large white gear.
©Carefully place the platter on the motor board by fitting the
center hole over the center spindle. Be careful that no foreign ob
jects lodge under the platter.
• Do not touch the magnetic coating or the magnetic pick-up head.
O Place the rubber mat on the platter.
Disc centering guide instailation
Insert the supplied disc centering guide as illustrated.
30 cm record