Watching tv programs – Sony Cable Box User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chafjter 2: Using Basic Features
^ Watching TV Programs
«
- von»« ♦
- CHAWWEL ♦
RM-Y116
1
Press POWER on the TV or the Remote Commander to turn the TV on.
POWER
O
b
POWER
The TIMER/STAND BY indicator blinks until the picture appears on the screen.
2
Turn the cable mode on or off to select the type of channel you want to
watch, VHF/UHF or cable TV.
(Follow the steps in ‘Turning the Cable Mode On or Off,” p. 17.)
If “VIDEO" or “S VIDEO" is displayed on the screen, press the TV/ViDEO button on the TV
or on the Remote Commander so that the channel number appears.
Select a channel in one of the following two ways:
To scan the preset channels* in numerical sequence
Press CH +/-.
CH
b
* For more information on presetting channels, see pp. 18 - 22.
To select a channel directly
Press 0-9 and ENTER.
For example, to select channel 14, press 1,4 and ENTER.
© © ©
© © © p.
© © ©
WSPUtY /7^ ENTBR \
CD (0) CD
Press VOL +/- to adjust the volume.
The display will disappear automatically after 3
seconds.
Press + to increase the voiume.
Press - to decrease the volume.
To turn off the TV
Press POWER on the TV or the Remote Commander again.
28
Chapter 2: Using Basic Features