Sony CDP-C445 - Manual (Page 25)

Chapter 5 Additional Information
Maintenance Specifications
Cleaning Your Player
Clean the cabinet, panel and controls: with a soft cloth lightly
moistened with a mild detergent solution. Do not use any
type of abrasive pad, scouring powder or solvent such as
alcohol or benzine.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for analog
discs.
Compact Disc Player
System
Laser
Wavelength
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Outputs
LINE OUT
(phono jacks)
DIGITAL OUT
(OPTICAL)
(optical output
connector)
PHONES
(stereo phone jack)
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Remote Commander
Remote control system
Power requirements
Dimensions
Mass
Compact disc digital audio system
Semiconductor laser
780-790 nm
2 Hz-20 kHz (±0.5 dB)
More than 107 dB
More than 98 dB
Less than 0.0035%
More than 100 dB
Output level 2 V
Load impedance over 10 kilohms
Wave length 660 nm
Output level -18 dBm
Output level max. 10 mW
Load impedance 32 ohms
Model for the USA and Canada
120 VAC, 60 Hz
Model for Australia
240V AC, 50/60 Hz
14W
430 X 125 X 385 mm (w/h/d)
(17
x 5 x 15'/4 inches)
Including projecting parts and
controls
5.7 kg, net
(12 lbs lOoz)
RM-D335
Infrared control
3 V DC with two size AA batteries
(lEC designation R6)
45
X 20 X 185 mm (w/h/d)
(1 'Vi6 X ’Vi6 X Vk inches)
100 g (3.5 oz) including batteries
Design and specifications are subject to change without
notice.
25