Installing the batteries, Notes on batteries, Mounting the wireless remote – Sony CDX-T68PKG User Manual
Page 4: Preparing the wireless remote, Resetting the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Resetting the display
Before operating the unit for the first time or
after replacing the car battery, you must reset
the display.
Press the reset button with a pointed object,
such as a ball-point pen.
¥
Reset button
Note
^
Pressing the reset button will erase all the memorized
programs.
Preparing the wireless
remote
Installing the batteries
Two size AA (R6) batteries
Battery life is approx, six months although it
depending on use.
Notes on batteries
To avoid damage from battery leakage and
subsequent corrosion:
— insert the batteries by matching the and
on the batteries to the "+" and in
the battery compartment.
— do not use an old battery with a new one,
or different types of batteries together.
— remove the batteries when you do not use
the unit for a long period of time.
— do not charge the batteries.
If any battery leakage occurs, replace the
batteries with new ones after cleaning the
battery compartment.
Mounting the wireless remote
Velcro tapes
to the place you
wish to install to
Install the wireless remote with velcro tape in the
desired place.
Notes
• Do not install or leave the wireless remote in a location
near any heat sources, or in a place subject to direct
sunlight (especially on the dashboard in summer etc.).
• When you park your car in direct sunlight, detach the
wireless remote and place it in a location such as the
glove-box, where it mil not be subjected to direct sunlight.
• Before installing the wireless remote, be sure to check
whether you can remote-control the system from the
place where you intend to install the loireless remote.
• Clean the surface before attaching the velcro tape.
4