Recording, Tape counter, Mic(pluginpoweiq – Sony M-527V User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Recording
Make sure that nothing is connected to MIC
EAR
TAPE
SPEED
TAPE
COUNTER
MIC(PLUGINPOWEIQ
Microphone
REQBATr
CUE MARKER
k-PAUSE
MCUE/REViEW
VOR
(M-627V/677V/727V only) Press the reset button of
the TAPE COUNTER.
Press Hdb and insert a standard microcassette with
the side to start recording facing the lid.
Select the desired tape speed.
2.4 cm for optimum sound (recommended for normal
use): A 30-minute recording can be made using both
sides of the MC-30 microcassette.
1.2 cm for longer recording time: A 60-minute
recording can be made using both sides of the MC-30
lXUCrOCdSS0(t6*
(M-527V/627V/677V/727V only) Set VOR to H, L or
OFF.
If you set VOR to H or L, the unit automatically starts
recording the sound and pauses when there is no
sound (you can save tapes and batteries).
H: To record at meeting or in a quiet and/or spacious
place.
L: To record for dictation or in a noisy place.
When the sound is not loud enough, set it to OFF, or
the unit may not start recording.
Press#.
Recording starts. While the tape runs, the REC/BATT
lamp (M-627V/677V/727V only) lights and flashes
depending on the strength of the sound.