Vermont Casting RADVTCBB - Manual (Page 21)

21
Radiance Direct Vent Gas Heater
20012697
�����
������������
����
Gasket
Lock Tab
Inlet End Outlet End
ST922
To Termination To Appliance
Fig. 34 Joint connection.
it by screwing the support plate to the top of the prop-
erly framed ceiling joist opening, using screws provided.
A round trim plate (TP) is attached to the ceiling, using
screws, to provide a finished appearance once in-
stalled. (Fig. 35)
�����
�������
����������������
����
Ceiling Support
Plate
Ceiling Support
Collar
Trim Plate
ST923
Fig. 35 Ceiling support.
Fig. 36 Selkirk Venting Components
Vent Termination (VC)
Storm Collar (SC)
Roof Flashing (AF)
Ceiling Support
(CS)
Trim Plate (TP)
Pipe Length
Pipe Length
Appliance Adapter
(AAV)
ST924
Vertical Venting
Pipe Length
Appliance Adapter
(AAV)
90° Elbow
(EL90)
Pipe Length
Trim Plate (TP)
(Required if Wall
Thimble is not used)
Wall Thimble (WT)
(Optional)
Horizontal Termination (HC)
ST925
Horizontal Venting