Sony CDX-71RF - Manual (Page 15)

You can put a title of your own choosing onto a
disc (one title per disc). The title can be displayed
on the display window while the disc is being
loaded and played. A maximum of eight letters
can be used per title.
4 Press the ENTER/DELETE button after
locating a desired character.
E H I r
Jb±'. __________________
/ I N
The flashing part will move to the next
space on the right. Repeat steps 3 and 4 to
enter the entire titles. Up to eight characters
can be used per disc.
Notes
• If you press the ENTER button when the eighth
character (farthest right character) is flashing, the
flashing part goes back to the first character (farthest left
character).
• If you wish to put a blank space after a character, select
(under-bar).
5 ® To continue putting titles onto the
discs,
— Press the [ -
disc +).
® To return to the normal CD playback
mode,
— Press the NAME LIST/NAME EDIT
button for more than two seconds.
If you press the CD button, the next CD changer will be
selected and the system will reenter the normal CD
playback mode (When two or more CD changers are
connected).
Changing a Registered
Title
— Disc Memo Function
Play the disc whose title you wish to
change and repeat steps 2 to 5.
When you change the title, the level settings of output will
not be erased.
Erasing a Registered Title
— Disc Memo Function
1 Select the CD changer and play any disc.
2 Press the NAME LIST/NAME EDIT button
for more than two seconds.
The system will enter the name edit mode.
3 Press the DSPL/CLOCK SET button for
more than two seconds.
4 Press either the Q o'" Q select the
title that you wish to erase.
5 Press the ENTER/DELETE button for more
than two seconds.
Now the title is erased.
Repeat step 4 and 5 if necessary.
6 Press the NAME LIST/NAME EDIT button
for more than two seconds.
The system returns to the normal CD
playback mode.
When you erase the title, the level settings of output will be
erased as well.
The alternative method to erase a title
You can erase a title by selecting eight (under-bars) as
described in step 3 of "Putting Your Personalized Titles
onto the Discs" (Page 12).
Displaying the Registered
Titles
Press the DSPL/CLOCK SET button.
H I 5 C H U B E R T
Each time you press the DSPL/CLOCK SET
button during CD playback, the display on the
display window changes as follows:
Elapsed playback time
i
Disc title
I
Clock
o
lO
0)
3
ft>
3
o
c
3
n
r+
o*
3
n
c
o
3
a>
“n
C
3
n
o'
D
continue to next page
1 3