Specifications – Sony CFD-DW83 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Specifications
AUDIO POWER SPECIFICATIONS
Full-range speakers:
With 6-ohm loads, both channels driven from
500-10,000 Hz: rated 2 W per channel-
minimum RMS power, with no more than
10% total harmonic distortion in AC
operation.
Super woofer:
With 6-ohm loads, driven from 50-250 Hz:
rated 5 W minimum RMS power, with no more
than 10% total harmonic distortion in AC
operation.
OTHER SPECIFICATIONS
CD player section
System
Laser diode properties
Spindle speed
Error correction
Number of channels
Frequency response
Wow and flutter
Radio section
Frequency range
Compact disc digital audio system
Matehai: GaAIAs
Waveiength 780 nm
Emission duration: Continuous
Laser output: Less than 44.6^W*
* This output is the value measured at a
distance of about 200 mm from the
objective lens surface on the optical
pick-up block.
200 r.p.m. to 500 r.p.m. (CLV)
Sony Super Strategy Cross Interleave Read
Solomon Code
2
20-20,000 HzildB
Below measurable limit
FM: 87.6-108 MHz
AM: 530-1,605 kHz
FM: Telescopic antenna
AM: Built-in ferrite bar antenna
Tape recorder section and general
Recording system
Fast winding time
Frequency response
Speaker
Power output
Inputs
Outputs
Power requirements
Power consumption
Battery life
4-track 2-channel stereo
Approx. 2 min. with Sony cassette C60
•Total with TYPE 1 (NORMAL) cassette:
60-10,000 Hz
• Playback with TYPE 1 (NORMAL)
cassette: 60 -12,000 Hz
Full-range speakers: 10 cm dia., cone type
Super woofer: 8 cm dia.
Model for Canada
Full-range speakers: 2.5 W + 2.5 W (at 6
ohms, 315 Hz, 10 % harmonic distortion)
Super woofer: 7 W (at 6 ohms, 100 Hz,
10% harmonic distortion)
Mixing microphone input jack (minijack)
Sensitivity 2.5 mV
For low impedance microphone
Two line input jacks (phono jacks)
Sensitivity 0.3 V
Input impedance 47 kilohms or higher
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones
Two CD output jacks (phono jack)
Load impedance 10 kilohms or higher
Rated output 1.26 V rms at load
impedance 47 kilohms
120VAC, 60 Hz
DC 12 V, 8 size D (R20) batteries for CD radio
cassette-corder
DC 4.5 V, 3 size AA (R6) batteries for
clock/timer
Model for USA AC 27 W
Model for Canada AC 33W
Batteries for radio cassette-corder
Recording
Playback
CD playing
Sony SUM-1 (NS)
approx. 2.5H
approx. 2H
approx. 1H
Sony Alkaline AMI (N) approx. 3.5H
approx. 3H
approx. 1.5H
Dimensions
Weight
Supplies accessory
636.5 X 211 X 226 mm (w/h/d)
(25Vs
X
8%
X
9 inches)
incl. projecting parts and controls
Approx. 8.3 kg, incl. batteries
(Approx. 18 lb 4.8 oz)
AC power cord (1)
Design and specifications subject to change without notice.
OPTIONAL ACCESSORIES
Stereo headphones MDR-E484
Dynamic microphone F-V33
Connecting cord RK-C74 (two phono plugs *
Cassette erase BE-A200
Head demagnetizer HE-5C
Head cleaning stick CLH-5
Cleaning kits KK-4
CD cleaner XP-CD1, XP-CD3, XP-CD4
* two phono plugs)
26