Sony CFD-Z135 - Manual (Page 23)

Symptom Remedy
The tape does not move when vo.u
press an operation button. • Close the cassette compartment securely.
The REC 9 button does not • Make sure the safety tab on the cassette is in
function/The tape does not play. place.
• Make sure "TAPE" appears in the display.
The tape does not erase completely. • Clean the erasing head (see page 24.)
• Replace all the batteries with new ones if they
>»
iU
Ou
are weak.
The tape does not record. • Make sure the tape is inserted properly.
0>
Q. • Make sure the safety tab of the cassette is in
(Q
1-
place.
The audio is weak/The audio • Clean the heads, pinch rollers and capstans (See
quality is poor. page 24).
• Demagnetize the heads using a demagnetizer
(see page 24).
The sound is distorted. The TYPE II (high position) or TYPE IV (metal)
tape is being used. Use TYPE I (normal) tape
only.
1
N
CC
The remote does not function.
C
o
to
• Replace all the batteries in the remote with new
ones if they are weak.
• Make sure that you are pointing the remote at
the remote sensor on the player.
• Remove any obstacles in the path of the remote
and the player.
• Make sure the remote sensor is not exposed to
strong light such as direct sunlight or
fluorescent lamp light.
'• Move closer to the player when using the
remote.
After trying the above remedies, if the player still does not function properly, unplug the AC
power cord and remove all the batteries. After all the indications in the display disappear, plug
the power cord and insert the batteries again. If the problem persists, please consult your nearest
Sony dealer.
Additional Information 2