Sony RM-V22 - Manual (Page 4)

'96-11-15 19:24 SONY КК GЙl>э'^tУ^MT P. 2/7
Operating a Receiver
S
To turn on and off.
To set up the Commander.
To select the input source:
1 selects VIDEO 1
2 selects VIDEO 2
3 selects VIDEO 3
4 selects TUNER
5 selects CD PLAYER
6 selects TAPE DECK
8 selects TV
9 selects CABLE BOX
(7 and 0 do not have an
assigned function).
[ 4 ] To light up the Conunander’s
buttons. (The light will
automatically turn oif if no
button is pressed for more than
10 seconds.)
[ 5 ] Volume up: +
Volume down: -
[6] To mute the volume on a
receiver.
Press again to turn muting off.
|У) Set to AVI or AV2 on which
the receiver is assigned.
[B] Preselling frequency up: +,
down: -
Tuning frequency up: +,
down: -
[ 9 ] To shift band (EM/AM).
Note
On the AVI position of the slide
switch, the functions to operate Sony
brand receivers ace preset at the
factory.
Operating a Tape Deck
a
S To turn on and off.
To set up the Commander.
To select the tape direction:
1 selects Deck A (dual cassette
deck only*).
2 selects Deck B(dual cassette
deck only*).
0 functions as M REV button, or
switches play sides.
(The other buttons do not
have assigned functions).
To record, press ► while
pressing#/First release ►,
then release #.
To pause
To rewind
To stop
To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
Set to AVI or AV2 on which
the tape deck is assigned.
To play
To fast-forward
To select the tape deck: deck A
or deck B (dual cassette deck
only**).
* If your deck's commander has
two sets of tape op>erating
buttons and has no A/B buttor
for deck selection, use the
numeric buttons (1 and 2);
button 1 selects Deck A, and
button 2 selects Deck B.
** If the deck's commander has
one set of tape operating
buttons, and has an A/B
button for the deck section, use
the RECALL button to select
Deck A or B
Operating a CD Player
-2 7o turn on and off.
To set up the Commander.
51 To select the track number. 0
selects track 10.
To select track numbers above
10, see the descriptions on the
DISP button below.
IT] To select numbers 10 and
above.
For example, to select track 15,
press DISP and then press 5.
^ To play
6. To select the previous track.
7_ To stop
8] To light up the Commander's
buttons. (The light will
automatically turn off if no
button is pressed for more than
10 seconds.)
9] Set to AVI or AV2 on which
the CD player is assigned.
To pause
To select next track.
To select next disc.
Note
On the AV2 position of the slide
switch, the functions to operate Sony
brand CD players are preset at the
factory.
Component Code Numbers
TV and VCR Codes
Brand Component Code No.
Sony VCR 01 CVTR3; VHS)
02 rVTR2: S mm)
D3(VTR1: Beta)
TV 01
Admiral (M.Wards) VCR 27
TV 02,14,09
Aiwa VCR 38
AOC TV 12
Audio Dynamic VCR 14, 37
Bell & Howell VCR 30,43
(M. Wards)
TV 14,09,38
Bfocsonic VCR 17,19
TV 03,12
Canon VCR 09,08
Citizen VCR 32
Craig VCR 15,32
TV 22, 23, 20, 21
Croslex TV 11
Curtis Mathis VCR 04,38,09
TV 03,19,23
Daewoo VCR 41,12,09
TV 35,36,03
TV/VCR Combo 36 (TV) & 41 (VCR)
Daytron TV 13
DBX VCR 14,36,37