Sony ICD-30 - Manual (Page 6)

Adding/Erasing Index Marks
You can add or erase index marks after recording.
Changing the Display
LIGHT
DGPIAY
Dividing a note
You can divide a note by adding index marks.
The index numbers will increase as follows.
The display changes as follows every time you press DISPLAY.
After 10 seconds without pressing any button, the unit returns to
clock display.
1 3 4
A Index ma
♦
rking
1 2 3 4 5
Recorded date
'i'
Time counter
'i'
Recordable time
I_______
Index numbers increase
While the unit is playing a note, press INDEX at the point you want
to mark. The index number flashes. .
An index mark is added and the following index numbers will
increase by one.
Combining notes
You can erase an index mark to combine the notes before and after
the index mark.
The index numbers will change as follows.
1 2 3 4 5
▲ Index ma
♦
rfc erasing
1 2 3 4
Notes
• Recordable time varies depending on if SP or LP is selected.
• "--------- " is displayed instead of:
— the clock display when you have not set the clock.
— the recorded date of the note when you have not set the clock.
— the recorded date when you have not recorded any note.
To see the display in a dark place
Press LIGHT and the display is lit.
To turn off the light, press LIGHT again.
If you do not operate the unit for 10 seconds while the light is on,
the light turns off automatically.
Index numbers decrease
1 Find the index number you want to erase.
2 Press INDEX and ERASE at the same time for more than a
second.
The index number and "ErASE" flashes for 10 seconds.
3 While the display is flashing, press ERASE.
The notes are then combined and unit returns to the normal
mode.
To cancel Erasing
Press HSTOP before step 3.