Sony GDM-2038 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjustment

Clearing the User-Stored Condition for Coior Temperature

Method 1

(Clearing the unnecessary

user-stored conditions only)

Select the color temperature by using the COLOR SELECT switch while the power is

turned on. Press the coior adjustment button. Then press the SELECT < and >

buttons simuitaneousiy for 5 seconds or ionger whiie the coior adjustment indicator is

iit. The user-stored conditions of the seiected color temperature are reset to factory-

preset conditions.

Method 2

(Clearing all the user-stored
conditions at once)

Press the color adjustment button while the power is turned on. While the color

adjustment indicator is lit, press the RESET button at the rear with the tip of a ball
point pen or a similar object. All the user-stored conditions are reset to factory-preset

conditions at once.