Sony GDM-2038 - Manual (Page 14)

Adjustment
Storing the Adjusted Condition
The adjusted display condition is stored in memory under the following conditions:
• When you select another adjustment item by pessing the SELECT buttons.
• When 10 seconds have elapsed after the adjustment and the 3 /a indicator is lit.
The upper 8 adjustment items listed below are stored for each different input signal of
up to 15 types.
The lower 4 adjustment items are stored independently from the types of input
signals.
Adjustment item How stored
e They are stored together with the type of the
(horizontal size) input signai.
O The adjusted condition for up to 15 different input
(horizontal centering) signals can be stored.
GD The stored condition is called back from memory
(vertical size) when the corresponding signal is input, and the
0
(vertical centering)
a
(pincushion distortion)
D
(pincushion distortion
balance)
Q
(keystone distortion)
O
(keystone distortion
balance)
optimum display is obtained for this signal.
3 (contrast) They are stored independently from the input
(brightness) signal.
® Normally adjust the convergence when red and
(horizontal static blue colors are shifted due to the direction of the
convergence) unit, or by being affected by the terrestrial
*
(vertical static convergence)
magnetism.
When the 16th condition is stored
The condition stored first is replaced by the 16th.
Care should be taken when a number of different conditions are to be stored.
if you modify the condition for the preset-type modeis
It also will be stored in memory. When called back from memory, priority is given to
the modified condition. When the user-stored conditions are cleared, the factory-
preset conditions return.
14