ClearSounds CLA7V2 - Manual (Page 8)

8 – ENGLISH 9 – ENGLISH
During the call, you can adjust the volume 7.
of the CLA7v2 by using the volume control
knob located on the side of the unit.
You can also manually adjust the volume
8.
level on your phone if the sound quality is
unsatisfactory.
on completion of the call, press the oN/oFF
9.
button and the LED will turn off indicating
the neckloop is no longer in use.
Reset your hearing aid if needed.
10. Note: If
your phone does not have a 2.5mm jack,
an adapter may be required. Check with the
manufacturer of the telephone equipment.
Note: If your phone does not have a 2.5mm
jack, a 2.5mm adapter may be required.
Check with the manufacturer of the tele-
phone equipment or the store where you
purchased the cell phone or other device.
USING YOUR CONNECTIVITY
CORdS
Your CLA7v2 comes with 4 connectivity cords.
That are connected to the bottom of the CLA7v2
using the Connectivity Jack as shown in the
features diagram.
CLA7v2_EN,ES,FR.indd 8 7/29/08 7:26:59 PM