ClearSounds CLA7V2 - Manual (Page 6)

6 – ENGLISH 7 – ENGLISH
Installing the Batteries
IMPORTANT: The CLA7v2 needs to be
disconnected from the telephone before
installing the batteries.
open the battery compartment door 1.
located on the back of your CLA7v2 by
pulling back the latch.
Insert correctly (2) AAA alkaline
2.
batteries (included) in the battery
compartment. Be sure to observe
battery polarity as imprinted on the
base of the compartment.
Snap the battery compartment door
3.
back in place.
The CLA7v2 is ready to use.
4.
NOTE: The batteries will have approximately
30 to 40 hours of talk time before needing
replacement. Battery life will depend on actual
usage and amplified levels.
Low Battery Indicator
The low battery indicator monitors the condition
of the batteries. This LED indicator will turn red
to indicate the batteries should be changed.
The indicator will only turn red while in use.
Replace batteries as soon as possible with 2
AAA Alkaline batteries.
CLA7v2_EN,ES,FR.indd 6 7/29/08 7:26:59 PM