Sony DVP S530D - Manual (Page 10)

Receiver (Amplifier) Hookups
a
№
3
3
u
M
r*
9 j
(D
a
This connection is for listening to the sound through
speakers connected to a receiver (amplifier such as an
integrated stereo amplifier, a receiver having a built-in
Dolby Pro Logic decoder, etc.). Refer to the instructions
supplied with the component to be conr^ted.
You can enjoy 5.1 channel surround sormd by connecting
a receiver (amplifier) with 5.1 chcumel inputs. See page
32.
9 You can enjoy surround when connecting front speakers only
You can use 3D sound imaging to create virtual rear speakers
from the sound of the front speakers (L, R) without using actual
rear speakers (VES: Virtual Enhanced Surround). For details, see
page 32.
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Yellow (video)
to Yellow, Red (right) to Red and White (left) to White. Be sure to
make connections firmly to avoid hum and noise.
CD/DVp player
: Signal flow
m