Sony CPD-L181 - Manual (Page 16)

Customizing Your Monitor
I
Locking the Controls
The control lock function disables all of the controls except
the (!) (power) switch, MENU and some other buttons on
the front panel.
Once you select "LOCK," you can select only the following
items in the MENU OSD:
• EXIT
• CONTROL LOCK and FACTORY PRESET in the
OPTION OSD
If you press any locked button, the O ti mark appears on
the screen.
To cancel the control lock
1 Press the MENU button.
The MENU OSD appears.
MENU
KEXIT
mPHASE
03) PITCH
QCENTER
SSZOOM/SMOOTHING
SCOLOR
B LANGUAGE
2 Press the 'O'/'C- buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
»-Q
OPTION
MENU
3
a
(
a L a
\ica
W-. 5SEC
O k : unlock
OSD H POSITION
3 Press the buttons to select On (CONTROL
LOCK).
OPTION
■0(3
3
aa
EOI ,-----------------
@ • UNLOCK GS
< LOCK B
I----------------
CONTROL LOCK
4 Press the - button to select LOCK.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
Press the + button in step 4 to select UNLOCK.
Resetting the Adjustments
You can reset all of the adjustments and settings to the
factory settings.
The color temperature is reset to 9300K, the zoom setting is
reset to FULL 1 mode, and the power saving delay time is
reset to 5 seconds. The control lock is cancelled. All other
adjustments return to the default settings. The on-screen
language, however, does not change.
1 Press the MENU button.
The MENU OSD appears.
K£XIT .
MENU ^PHASE
ED PITCH
OCENTER
SSZOOM/SMOOTHING
S COLOR
BLANGUAGE
Press the buttons to select OPTION, and press
the MENU button again.
The OPTION OSD appears.
OPTION
:cs-3
MENU
3 O
tra L
Si
EOI
W--
5SEC
O k : unlock
OSD H POSITION
3 Press the i}/-!) buttons to select —(FACTORY
PRESET).
#3
3(
OPTION
s
ÍB
EOa
5SEC
J------------
< ON □
FACTORY PRESET
4 Press the + button.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button twice.
16