Harbor Freight Tools ITEM 60738 - Manual (Page 7)

Page 7 For technical questions, please call 1-800-444-3353. Item 60738
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Grounding Instructions
TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION
READ AND FOLLOW THESE INSTRUcTIONS:
110-120 V~ Grounded Tools: Tools with Three prong plugs
1. In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
2. Do not modify the plug provided – if it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow
stripes is the equipment-grounding conductor.
If repair or replacement of the electric cord or
plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
4. Check with a qualified electrician or service
personnel if the grounding instructions are
not completely understood, or if in doubt as
to whether the tool is properly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug.
6. Repair or replace damaged or worn cord immediately.
125 V~ 3-prong plug and Outlet
(for up to 125 V~ and up to 15 A)
Grounding
pin
7. This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated above in IMpORTANT SAFETy
INSTRUcTIONS. The tool has a grounding
plug that looks like the plug illustrated above
in IMpORTANT SAFETy INSTRUcTIONS.
8. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
9. Do not use an adapter to connect
this tool to a different outlet.
Functional Description
Specifications
Electrical Rating 120V~ / 60Hz / 40W (Light)
120V~ / 60Hz / 12A (Motor)
Fluorescent Bulb 18W, 23″ L x 1″ Dia. (Qty. 2)
Working Pressure 50 ~ 125 PSI
Air Consumption 13 ~ 15 CFM @ 80 PSI
Air Inlet Size 3/8″-18 NPT
Abrasive Capacity Approximately 15 lb.
Inner Cabinet 47-3/4″ W x 24″ D x 22-1/2″ H (Rear), 14″ H (Front)
Front Window 22-1/2″ W x 10-1/2″ H
Accessories 4mm, 5mm, 6mm & 7mm Ceramic Nozzles