Chicago Electric 96405 - Manual (Page 8)

Page SKU 96405 For technical questions, please call 1-800-444-3353.
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe These insTrucTions.
grounding
improperly connecting the grounding wire can result in
electric shock.
Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. do not modify
the power cord plug provided with the tool. never remove
the grounding prong from the plug. do not use the tool if
the power cord or plug is damaged. if damaged, have it
repaired by a service facility before use. if the plug will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
grounded Tools: Tools with Three prong plugs
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (see 3-prong plug and outlet.)
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal. (see 3-prong plug and outlet.)
The tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration.
(see 3-prong plug and outlet.)
3-prong plug and outlet outlets for 2-prong plug
1.
2.
3.