Learn, Remove – SONiVOX Twist User Manual
Page 7
7
MIDI Learn: Assigning MIDI Controllers to Twist's Controls
Learn
Twist's MIDI Learn feature lets you to assign or "map" Twist's knobs to any hardware MIDI
controller. To do this:
1.
Click the Learn button to enter Learn Mode, which lets you to assign hardware
MIDI controls to Twist's parameters.
2.
While in Learn Mode, adjust a parameter in Twist and then move a knob or slider on your
hardware MIDI controller. That knob or slider will now control that parameter.
3.
Click the Learn button again to exit Learn Mode.
Remove
If you want to change or clear a MIDI assignment, you will need to "remove" it. To do that,
follow these steps:
1.
Right-click the knob you wish to reassign or unlearn.
2.
Select one of the two options:
• Remove Learn: Clears the hardware control assignment
for the selected parameter only.
• Remove Learn [All]: Clears the hardware control
assignments for all Twist parameters.
You can now assign that knob to any other MIDI hardware control (described above in the
Learn section).