340t fm/am tuner, Setting the sleep time, Connecting the control bus – Cambridge Audio Azur 340T User Manual
Page 8: Custom installation (c.i.) use, Designed in london, england, Clipping vol auto, Azur fm/am tuner 9
Azur FM/AM tuner 9
Setting the Sleep Time
The Sleep function will turn off the 340T at a chosen time. It will also
generate a command on the Control Bus that, when connected, will turn
off a compatible Cambridge Audio Azur series amplifier (such as the
540A V2.0, 640A V2.0 and 740A).
To set the Sleep time:
1. On the remote handset, hold down the Alarm/Clock button whilst
simultaneously pressing the Standby button.
2. Press the | << >>| keys to alter the hour
3. Press Clock.
4. Press the | << >>| keys to alter the minute
5. Press Clock to finish.
Connecting the Control Bus
If it is desired to control a Cambridge Audio azur amplifier by the 340T’s
Alarm or Sleep timers, connect the two units via the orange Control Bus
sockets using the supplied orange RCA/phono lead as shown below:
340T FM/AM tuner
Custom Installation (C.I.) Use
The 340T has a Control Bus input/output that allow unmodulated remote
control commands (positive logic, TTL level) to be received electrically by
the unit and looped to another unit if desired. These control commands
are typically generated by custom installation (multi-room) systems.
The Control Bus sockets are colour coded orange and an appropriate
colour coded RCA/phono lead is provided for when this feature is used
(a plastic twist tie is also included for cable management). In addition
the 340T features direct IR/Control codes as well as toggle codes for
many of its features to simplify programming custom installation
systems. Special direct commands can be accessed on the supplied
remote control for teaching into C.I. systems as follows:
Specific power on/off commands – press and hold the Standby button.
The remote first generates it's usual amp and tuner standby (toggle)
commands (both are sent). Keep the button held down, after 12 seconds
an Amp On command will be generated, then if the button is kept held
down after a further 12 seconds an Amp off comand is generated, then
separated by 12 second pauses, Tuner On, and finally Tuner Off.
Specific band selection commands – press and hold the FM/AM key.
The usual band toggle command is first, then the FM Mode command,
followed by the AM Mode command is generated.
Specific Preset/Scan mode commands – Press and hold the Mode key.
The usual mode toggle command is first, then the Scan Mode
command, followed by the Preset Mode command.
Specific Mute On/Off commands – press and hold the Mute key. The
usual mute toggle command is first, followed by the Mute On command,
and then the Mute Off command.
A full code table for this product is available on the Cambridge Audio
website at www.cambridge-audio.com.
Aud
io
Output
Manufactured in an
ISO9002 approved facility
This device complies with part 15 of FCC rules
FM 75
Ω
FM 75
Ω
AM 300
Ω
AM 300
Ω
Control Bus
Control Bus
Audio
Output
L
R
L
R
In
Out
In
Out
Power Rating: 230V AC 50Hz
Risk of electric shock
Do not open
Caution
Risque de choc electrique
Ne pas ouvrir
Avis
Vorm offnen des gerates
Netzstecker ziehen
Achtung
azur 340T FM/AM Tuner
Max Power Consumption
: 7W
Designed in London, England
www.cambridge-audio.com
Impedance 4 - 8 ohms
Loudspeaker Terminals
Important
Please ensure that loudspeaker terminals are fully tightened
Veuillez s'assurer que les bornes de l'enceinte sont entièrement serrées
Impedance 4 - 8 ohms
Right
Left
Right
Left
Left
B
A
Left
Right
Right
B
A
IR1
IR2
IR4
IR3
Keypad 1
Keypad 2
Pre-Out
Tape In
Rec Out 1
Rec Out 2
AV / MD
DVD
Tuner / DAB
CD
Aux
Pre-Out
Tape In
Re
c Out 1
Rec Out 2
AV
/ MD
DVD
Tu
ner / DA
B
CD
Aux
Right
Left
Right
Left
Power AC
Max Power Consumption
: 600W
Off
Power
Mains Voltage Selector Switch (50 / 60Hz)
In
Out
Control Bus
Caution Risk of electric shock. Do not open. Avis Risque de choc electrique. Ne pas ouvrir. Achtung Vorm öffnen des gërates. Netzstecker ziehen.
Multi-Room
IR Emitter
In
PSU
In
Designed in London, England
www.cambridge-audio.com
Manufactured in an
ISO9002 approved facility
Fault requiring
service (DC)
Over temperature
Temporary overload
Loudspeaker short
Protection LED
indicators:
Please refer to
your User's Manual
for more information
CAP5
Clipping
Vol
Auto
On
340T
540A
V2.0