RearviewSafety RVS-splitter - Manual (Page 5)

Auto sequence means the quad box will show camera1,2,3,4 on full screen by turn ,
the default display time for each camera is one second .
There are 2 way to use the AUTO SEQUENCE function :
(1)Press the “AUTO” key on the quad box ;
(2) Press the key on the key board ,the screen will show quad vision ,then
press again ,the screen will show camera from 1-4 by turn .
“Hold time” means the camera image delay time on the screen after the trigger wire
operation is over.
5\Enter the “CAMERA SETUP” , the screen will show following picture :
User can adjust the BRIGHTNESS/Contrast/SATURATION/HUE/SHARPNESS
parameter from -24 to +24
MIRRORING :OFF means the quad box show camera by normal image
MIRRORING :ON means the quad box show camera by mirror image
Video input : 4 channel (CAM1 has audio input )
Video output :1 channel
Video output : 1 channel (from camera 1 audio)
Power input : DC9-32V