beautypg.com

2 power on/off, 1 power on, 2 power off – RearviewSafety RVS-7500 User Manual

Page 6: 3 reset system

background image

6

of the unit (The power interface is same as USB interface );

2. The other part connect to the power socket, it supplies power while charging.

【Remark】Red LED indicates it’s being charged. Please wait until it is fully charged and don’t

pull out the adaptor while charging. When it is fully-charged, the LED will turn to Blue. If low

battery or no battery, please charge it immediately.

3.1.2 Use the car charger to supply power

1.

Connect the DC part of the adaptor with the power interface

2.

The other part connect to the power socket, it supplies power while charging.

【Note】Please insert the car adaptor after running the car so as not to damage the

machine by electricity collision.

3.2 Power on/off

Power on/off is controlled.

3.2.1 Power on:

Please check:The battery is enough, or it is connected to external power source;

Please press the button on the top of the unit to boot.

【Note】If bring the unit form one place to another place, please boot until it adapts to

the environment. Big humidity fluctuation will make the mainframe short circuited.

3.2.2 Power off

Press the button on the top of the unit to turn off, the unit will enter the power

saving mode and maintain the last operation status when boot next time.

3.3 Reset system

If the system cannot work, you can reset the system by the following way: