RearviewSafety RVS-916619P - Manual (Page 13)

5. Depending on your monitor choice; clip on 7 inch rear mirror moni-
tor, 7 inch windshield button mount “windshield button provided” or
our std 7 inch stand alone monitor, mount the monitor and then in-
stall the multiplex box either under the driver seat or above behind
the driver seat on the wall ceiling area
6. If you are using a dbl din dash mount monitor, determine what im-
pedance that monitor has. Std is 7 5, but a few monitors have a 70
impedance. We can supply a cocoon RCA adaptor for a 70 impedance
monitor. We also can supply a RCA adaptor to go into any dbl din dash
monitor. Be advised that Gentex monitors only put out 6 volts and our
cameras require 12 volts for proper operation
7. Remove the OEM third brake light and use our supplied plug and
play “splice” connection for power to the third brake light LED’s
8. Attach the camera cable to our third brake light camera connection
and by using the factory screws, place it into the now empty area with
our supplied gasket
13
Reverse With Confidence
table of contents