Pro-Tools Large Radius Bender - Manual (Page 3)

3 ROLL BENDER
SET UP INSTRUCTIONS
STEP 1
CHOOSE THE APPROPRIATE ROLLERS TO BE USED FRO THE BEND. GREASE THE
BUSHINGS ON BOTH LOWER ROLLERS. TIGHTEN TO ROLLERS DOWN ENOUGH TO
HOLD TUBE SNUGG. (THIS ALIGNS ALL 3 ROLLERS!) NOW SET LOCKING COLLARS
ON LOWER ROLLERS AS SHOWN BELOW IN (FIGURE A). LOWER ROLLERS MUST
ROLL FREE!
1/32”
OUTSIDE ROLLER
LOCKING COLLARS
FIGURE A
QUALITY PRODUCTS MADE BY PEOPLE WHO CARE PRO-TOOLS (813) 986-9000
PAGE 3