Pro-Ject Audio Systems Set Hifi-Airplay User Manual

Page 2

Dear music lover,
thank you for purchasing a Pro-Ject “Hifi Airplay”-Set.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the units or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the power supply.
The power cord/power supply is used to disconnect the unit from the mains. Make sure that the
power cord/power supply is easily accessible at all times.

Never handle the device, the power

cord/power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,

such as a flower vase on or near the device. Never spill any liquid on the device or the power supply.
Never place any naked flame sources, such as lighted candles on or near the device. The product shall not

be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

What’s in the box



Stereo Box S including remote control handset, power supply and power cord



DAC Box S USB including power supply



Airport Express

including software and instruction for use



2 x Speaker Box 5 including wall mount brackets and instruction for use



Design Box 2 Acryl



Speaker cable, length 2 x 3 meter



8 x banana plugs (4mm )



Interconnect cable, length 20cm



Optical digital cable (TOSlink

), length 150cm



TOSlink

mini adaptor

For software installation*, use and tecnical data regarding the Airport Express

unit, please refer to

the instruction manual included.* We do not provide support for third party software products.

Connectors - Stereo Box S

Record Out

Right

Left

Right

Left

Pro-Ject Audio Systems, Vienna, Austria

Make all connections whilst the amplifier is disconnected from the power supply.

Connecting amplifier and D/A converter

Connect, using the supplied interconnect cable, the sockets IN1 on the amplifier to the sockets OUT on the DAC.
Inputs
Line level sources such as CD player radio or TV can be connected to the input sockets marked IN1 or IN2.

Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.