Pro-Ject Audio Systems Set iPod® goes Hifi User Manual

Page 6

Replacing batteries

Proceed as follows:

 Unlock and slide open the battery case cover

 Replace the battery.

Make sure the battery is the right way round !

 Close the battery case cover

Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.

Technical specifications Pro-Ject Stereo Box S

Power output:

2 x 25W/30W at 8 ohms/4 ohms (both channels driven)

Frequency response:

20Hz - 20kHz (±0,2dB)

Channel separation:

>40dB at 20kHz

Noise floor:

>-100dB (A weighted)

THD:

<0,05% at 10W

Gain: 22dB
Line-level inputs:

2 pairs RCA/phono sockets

Input impedance:

20kohms

Record Out:

3-pole 3,5mm co-axial jack

Speaker connectors:

4mm  banana plugs, spades connectors or naked wire

Outboard power supply:

20V/3A DC (peak 7A DC), suitable for your country's mains supply

Power consumption:

3A DC, <1W in standby

Replacement battery remote control: 1 x CR2032 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (122)mm
Weight:

720g without power supply

Technical specifications Pro-Ject Dock Box S Fi

Frequency response:

20Hz - 20kHz

Line-level output:

1 pair RCA/phono sockets

Output impedance:

15 ohms

Output voltage:

1Vrms

USB-output:

5-pole mini-B jack

USB-signal:

digital serial data protocol USB 1.1

Operating systems:

Windows XP

, Windows VISTA

, Windows 7

, Windows 8

, Mac OS

Video output:

S-video socket

Outboard power supply:

18V/500mA DC, suitable for your country's mains supply

Power consumption:

300mA DC max.. Power consumption is not constant.

It depends on the charging needs of the battery. <1W in standby

Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm - height plus height of iPod or iPhone
Weight:

585g without power supply

Technical specifications Pro-Ject Speaker Box 5

Recommended amplifier power:

10 - 150 watts

Impedance: 8ohms
Sensitivity (1W/1m):

86dB

Dimensions W x H x D / weight:

160 x 255 x 210mm / 4,2kg