Service, Warranty, Copyright, trademarks – Pro-Ject Audio Systems Power Box S 4-way User Manual

Page 3

Technical specifications Pro-Ject Power Box S 4-way & 6-way

Output voltage / current:

1 x 9V/3A max + 2 x 18V/1A max. + 1 x 20V/3A (4-way)

2 x 9V/3A max + 3 x 18V/1A max + 1 x 20V/3A (6-way)

Dimensions W x H x D:

103 x 72 x 36 mm (4-way)

203 x 72 x 36 mm (6-way)

Outboard power supply:

20V/3A (4-way)

24V/5A (6-way)

Weight (without power supply):

245g (4-way)

435g (6-way)

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should

be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright

The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing
process of technical development.

This manual is related to the following products:

Power Box S 6-way