Pro-Ject Audio Systems CD Box S User Manual

Page 4

Front panel controls

CD Box S

To switch on from standby or to standby

A short press of the push button on the left hand side switches the player to its fully operational status. To return
to standby, press the button for more than four seconds. The display shows STANDBY when the unit is in standby.
To switch to standby, playback must be stopped.

Inserting and ejecting a disc

Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading
mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the
total duration of the disc.
A short press of the button stops playback. Pressing again, ejects the disc.

Play

starts playback of the first track. The display shows the current track number, the elapsed time of the

current track and the play icon.

Pause

pauses playback. The display shows the current track number, the elapsed time of the current track and

the pause icon.
To resume playback press again.

Stop

A short press of the button stops playback. The display shows the total number of tracks on the disc, the
total duration of the disc and the stop icon.

Stepping between tracks

Press the buttons (previous track) or (next track). The display shows the number of the tracks as you
step, the elapsed time of the current track and the step icon.

Scanning through the disc

Press and hold the button (fast backward) or (fast forward) to scan through the disc. The display shows
the current track number, the elapsed time of the current track and the scan icon.
Releasing or will take you back to playback.