Proavio S4UF - Manual (Page 2)

S4UF
Quick start guide
S4UF | FW800 Storage Array with Multi-interface Connectivity PROAVIO TM
2
1
Thank you for choosing Proavio
Carefully unpack your S4UF storage system, and inventory the
accessories according to your model type.
What is in the box?
3
Unpack all components including the HDD mounting screws, key sets and
cables. If you are missing any of the items mentioned above, please contact
your dealer or contact proavio at www.proavio.com.
Unpack your Studiorack
Welcome
Thank you for buying Studiorack S4UF, the first professional FireWire800storage
solution designed for high resolution digital media production, and general high
performance storage requirements.
Standard IEC Power Cable - Qty 1
High-speed USB2.0 Cable - Qty 1
FW800 HDD Link Cable - Qty 1
High-quality FW800 Cable - Qty 1
High-quality FW400 Cable - Qty 1 Rack-ear Mounting Kits - Qty 2
S4UF Multi-Lane Array - Qty 1
Desktop Support Stands - Qty 4
Hot-swap Disk Trays - Qty 4
HDD Mounting Hardware - Qty 16
4
Disk Installation
If your S4UF was purchased with capacity, please skip this section and
immediately go to section 5. If your S4UF was purchased without disks,
install each disk into the provided disk trays and fasten using the supplied
hdd screws. Do not use any other mounting screws other than the ones provided
with your S4UF. System or disk damage may occur if using non-approved
mounting hardware.
5 Insert Disk Module
After fastening each disk, insert the disk trays in the open disk bays on your
S4UF. Gently press the tray handle until you hear a “soft” click. Do not force
the tray into the disk bay.
Hard Disk
Disk Tray +
+ +
+
NOTE: Push right to unlock
Figure 1. Figure 2.
Figure 3.
Disk tray - Bottom view
Gently “press” tray handle to insert HDD
Disks 1-2
Disks 3-4
FW400 FW800 FW800 USB2.0
FW400 FW800 FW800 USB2.0