Clarion VDH910 User Manual
Page 21
OWNER’S MANUAL/INSTALLATION GUIDE
19
Symptom
Cause
Solution
Unit does not
No power.
Verify power wiring
work.
to unit (see page 18).
Check the Remote
for a good battery.
Videocassette
Another tape
Eject first video cas-
does not insert
is already in unit.
sette and insert a
into unit.
second tape.
Dew/Heat Sensor Leave power on to
is on.
unit. (see page 4).
Pressing POWER Unit is in Auto
Go to Auto Repeat
will not turn unit
Play and buttons
in the On-Screen
off.
are inoperable
function and turn that
(see page 11).
function off.
Tape will not
Tape is fully
Eject videocassette
rewind or
rewound or at
and check tape
fast forward.
beginning.
position.
Symptom
Cause
Solution
Picture is noisy
Videocassette
Eject videocassette
is worn.
and play another.
Tracking is not
Adjust tracking
set optimally.
(see page 10).
Video heads
Clean unit – see
are dirty.
your Clarion dealer.
Videocassette
Another tape
Eject first video cas-
does not insert
is already in unit.
sette and insert a
into unit.
second tape.
Dew/Heat Sensor
Leave power on to
is activated.
unit. (see page 4).
Hi-Fi indicated
Videocassette
Play a videocassette
but sound is
recorded by stereo that has a Hi-Fi
mono.
recorder in mono.
stereo soundtrack.
Videocassette
Unit is set to mono Use Remote buttons
sounds mono.
in Audio Output
to change audio
mode.
modes (see page 11).
T
ROUBLESHOOTING