Clarion VDH910 - Manual (Page 14)

VDH910 VIDEOCASSETTE PLAYER/RECORDER
12
Figure 8. Antenna/Cable display for On-Screen programming.
Channel Setup
When the VDH910 memorizes all available channels, you can
use CH/TRK UP/DN to select channels. Use the SHIFT but-
ton on the remote control to toggle down to the Channel Setup
function in the Main Menu.
Setting the Source
Before memorizing all available channels, set the signal
source for the VDH910’s TV tuner.
• Select the Channel Setup function from the Main Menu
then press the ENTER button.
• Use the SHIFT button to select either Antenna or Cable
input (with most Mobile Multimedia installations, we rec-
ommend using the Antenna mode).
Auto Channel Memory
The VDH910 automatically memorizes all available chan-
nels and stores them into the memory of the tuner.
• Select the Auto Channel Memory function from the
Channel Setup Menu then press the ENTER button.
The tuner will begin scanning and memorizing all available
channels. When finished, the channel numbers on the screen
will stop.
** MAIN MENU **
RECORD SPEED ............. (SP)
AUTO REPEAT............... (OFF)
AUDIO OUTPUT ..... (STEREO)
CHANNEL SETUP
VCR OUTPUT CH.......... (3CH)
[SHIFT/ENTER] [MENU]
** CHANNEL SETUP **
ANT/CABLE......... (ANTENNA)
AUTO CHANNEL MEMORY
CHANNEL ADD/DELETE
[SHIFT/ENTER] [MENU]
ANT/CABLE ........ (CABLE TV)
To Store
and EXIT
** CHANNEL SETUP **
ANT/CABLE......... (ANTENNA)
AUTO CHANNEL MEMORY
CHANNEL ADD/DELETE
[SHIFT/ENTER] [MENU]
MEMORIZING CH 02
............PLEASE WAIT..............
[MENU]
CH 04
CH 05
CH 07
CH 09
etc....
To Store
and EXIT
Figure 9. Auto Channel Memory for On-Screen programming.