Curtis WF-037a - Manual (Page 16)

¾ If no buttons are pressed within 30 seconds, the unit
will return 1minute count down mode then start PIR
capturing.
3.2 Set the Resolutions:
• Power on the unit, press the [MENU] button to call
out the menu.
• Press the [UP] or [DN] to move the highlight to
RESOLUTION
• Then press the [CONFIRM] button to into the
resolution settings.
• Press the [UP] or [DN] button to select the
resolutions and press [CONFIRM] to confirm.
• Press [MENU] button again to exit the resolution
setting.