Curtis WF-037a - Manual (Page 12)

• Time out: To set the time amount of time the camera
will sleep between PIR triggering.
• Auto Flash: If the brightness is lower then EV 12.
the unit will turn on the flash lighting automatically.
• Capture mode: It shown the capture mode that you
have selected.
o 1P: Single image capturing per PIR triggering.
o 2P: Two images continuous capturing per PIR
triggering.
o 3P: Three images continuous capturing per PIR
triggering.
o Video: Taking 10 seconds video per PIR
triggering.
• Resolution: It shown the resolution selection that
you have selected.
o 1600 x 1200 2.0M: Select this option to capture