Clarke D18 - Manual (Page 7)

EN ENGLISH
Clarke ® Operator's Manual (EN) - D15 & D18 - 7 -
Figure 7
Figure 6
5. Install the wand assembly in the right rear canister
housing (see figure 6, item A).
6. Position wand handle so that handle is towards
the front of the machine (see figure 7, item A).
7. Attach hose to wand and canister (see figure 7).
To attach hose properly, depress lock on canister
(see figure 7, item B).
8. Snap the crevice (B) and upholstery (C) tools into
the tool retainer on rear of canister housing (see
figure 6).
A
B
C
A
B
B