Dell 1210S Projector User Manual

Page 21

4 TEMP warning light

If the TEMP amber indicator is on or blinking,

one of the following problems could be occurring:
• Internal temperature of the projector is too

high

• Color wheel failure
For more information, see "Troubleshooting Your

5 Enter

Press to confirm the selection item.

6 IR Receiver

Point the remote control towards the IR receiver

and press a button.

7 Right

/ Auto Adjust Press to navigate through the On-Screen Display

(OSD) Menu items.
Press to synchronize the projector to the input

source.

NOTE:

Auto Adjust does not operate if the

on-screen display (OSD) is displayed.

8 Down

/ Keystone

adjustment

Press to navigate through the On-Screen Display

(OSD) Menu items.
Press to adjust image distortion caused by tilting

the projector (+40/-35 degrees).

9 Left

/ Source

Press to navigate through the On-Screen Display

(OSD) Menu items.
Press to toggle through Analog RGB, Composite,

Component (YPbPr via VGA), and S-video

sources when multiple sources are connected to

the projector.

10 Menu

Press to activate the OSD. Use the directional

keys and the Menu button to navigate through

the OSD.

Using Your Projector