CLIFFORD 12.5X - Manual (Page 39)

34 © 2 0 0 6 d i r e c t e d e l e c t r o n i c s
Exit Shock Sensor Adjustment Mode:
The adjustment mode will be exited if:
➤ ➤
No input from transmitter for 15-seconds.
➤ ➤ No input from sensitivity testing for 15-seconds.
➤ ➤
The ignition is turned On.
➤ ➤
The Valet button is pressed.
The siren and LCD remote will emit 1 long beep and the
vehicle’s LED will extinguish when shock adjustment mode is
exited.
Reset Shock Sensor to Default Setting:
The shock sensor can be restored to a default setting of 10 to
facilitate re-adjustment at any time w wh hiillee iin n adjustment mode.
1. Simultaneously press the and buttons.
2. The siren and LCD remote will emit 3 quick beeps to indi-
cate the sensor has been reset to level 10 (mid-range).
3. The system returns to shock sensor adjustment mode for
further adjustment, if required.
➜
➜