Dell PowerEdge M605 - Manual (Page 14)

Rev 1.0 Mellanox Technologies
14
Note: Cable lengths should be used which allow for routing horizontally around to the side of the
chassis before bending upward or downward in the rack.
3 Management Tools Overview
3.1 Updating Firmware
The switch is delivered with the latest Firmware. New firmware versions are issued as development
progresses. When new firmware becomes available Mellanox will notify customers, and the new
firmware image will be found on the Mellanox firmware download page.
You will need the Mellanox Firmware Tools package to update firmware for this switch. It can be
downloaded from:
http://www.mellanox.com/products/management_tools.php
Note: Don’t forget to set the flag for IBspark when you install the MFT kit.
Firmware for this switch can be updated by going to the site below and following the directions for
burning new firmware.
The latest firmware can be found at:
http://www.mellanox.com/support/firmware_download.php