Dell Inspiron 580s (Late 2009) - Manual (Page 35)

Processor L1 Cache Displays the amount of processor Level 1 cache.
Processor L2 Cache Displays the amount of processor Level 2 cache.
Processor L3 Cache Displays the amount of processor Level 3 cache.
Memory Installed Indicates the amount of installed memory.
Memory Available Indicates the amount of available memory.
Memory Speed Indicates the frequency of installed memory.
Memory Technology Indicates the type of installed memory.
Standard CMOS Features
System Date Displays current date in the format (mm:dd:yyyy).
System Time Displays current time in the format (hh:mm:ss).
SATA-1 Displays the SATA drives connected to the SATA1 connector.
SATA-2 Displays the SATA drives connected to the SATA2 connector.
SATA-3 Displays the SATA drives connected to the SATA3 connector.
SATA-4 Displays the SATA drives connected to the SATA4 connector.
Advanced BIOS Features
CPU Feature l Hyper-Threading Technology — Enabled; Disabled (Enabled by default)
l Intel SpeedStep ® — Enabled; Disabled (Enabled by default)
l Virtualization — Enabled; Disabled (Disabled by default)
l Limit CPUID Value — Enabled; Disabled (Disabled by default)
l CPU XD Support — Enabled; Disabled (Enabled by default)
l Multi Core Support — Enabled; Disabled (Enabled by default)
l Intel TurboMode tech — Enabled; Disabled (Enabled by default)
USB Device Setting l USB Controller — Enabled; Disabled (Enabled by default)
Advanced Chipset Features
Onboard Audio Controller Enabled; Disabled (Enabled by default)
Onboard LAN Controller Enabled; Disabled (Enabled by default)
Onboard LAN Boot ROM Enabled; Disabled (Disabled by default)
Boot Device Configuration
Boot Settings
Configuration
l Numlock Key — On; Off (On by default)
l Keyboard Errors — Report; Do Not Report (Report by default)
Hard Disk Boot Priority Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives
detected.
CD/DVD Drives Boot
Priority
Used to set the device priority of CD/DVD drives. The items displayed are dynamically updated according to the CD/DVD drives
detected.
1st Boot Device Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default)
2nd Boot Device Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
3rd Boot Device Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
Power Management Setup
ACPI Suspend Type S1; S3 (S3 by default)
Remote Wake Up Enabled; Disabled (Enabled by default)
AC Recovery Power Off; Power On; Last Power State (Power Off by default)
Auto Power On Enabled; Disabled (Disabled by default)
Auto Power On Date 0
Auto Power On Time 0:00:00
BIOS Security Features
Supervisor password Indicates if the supervisor password is set or clear.
User password Indicates if the user password is set or clear.
Set Supervisor Password Press to set the supervisor password.
User Access Level No Access; View Only; Limited; Full Access (Full Access by default)
Set User Password Press to set the user password.
Password Check Setup; Always (Setup by default)