Dell E1912H Monitor - Manual (Page 27)

To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the blue display connector cable to the corresponding video port on the back of your computer.
Connecting the Blue VGA Cable
Removing the Monitor Stand
Attaching the Dell Soundbar
To attach the soundbar:
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions .
CAUTION: The graphics are used for the purpose of illustration only. Appearance on the computer may vary.
After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base:
1. Use a long screwdriver to push the release latch located in a hole just above the stand.
2. Once the latch is released, remove the base away from the monitor.
CAUTION: Do not use with any device other than the Dell Soundbar.