Dell 5100MP Projector - Manual (Page 3)

www
.dell.com | support.dell.com
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
A value which indicates the lamp hours of the projector, that is, the number of hours the lamp
has been turned on since it was replaced.
"
::= { dellMIB5100MP 3 }
pjtTemperature OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
A value which indicates the temperature of the projector in degrees Celsius.
"
::= { dellMIB5100MP 5 }
pjtPowerButton OBJECT-TYPE
SYNTAX INTEGER {
off(0), -- will go through a cooling period before power off
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
A command value which can be used to power on/off the projector. This command will affect the
value of pjtState.
NOTE: In general, a projector will not power down immediately, but will enter a period of cooling
before powering off. This transition will be reflected in the value of pjtState.
0: Off ; 1:On