Dell 5100MP Projector - Manual (Page 11)

www
.dell.com | support.dell.com
pjtVolume OBJECT-TYPE
SYNTAX INTEGER (0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The current volume of the projector.
0(zero) indicates minimum volume, that is, the smallest possible volume output; 30 indicates the
maximum volume, that is, the largest possible volume output.
The value can be set directly as a command to change the volume level.
"
::= { dellMIB5100MP 26 }
END
____________________
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their
products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.