Dell OptiPlex 7010 (Mid 2012) - Manual (Page 43)

Option Description
• DNS (enabled by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer .
ImageServer IP Specifies the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Lookup
Method is set to Static IP .
ImageServer Port Specifies the primary IP port of the ImageServer, which can be used by the client to
communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer .
Client DHCP Specifies how the client obtains the IP address.
• Static IP
• DHCP (enabled by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer .
Client IP Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP
is set to Static IP .
Client SubnetMask Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP
is set to Static IP .
Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP
is set to Static IP .
License Status Displays the current license status.
Table 12. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
43