Dell 1430X Projector User Manual
Page 21
Using Your Projector
21
4
TEMP warning light
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 44 and "Guiding Signals" on
5
Up
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
6
Volume up
Press to increase the volume.
7
Right
/ Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
8
Volume down
Press to decrease the volume.
9
Enter
Press to confirm the selection item.
10 Down
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-40 degrees).
11 Menu
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
12 Left
/ Source
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), and S-video
sources when multiple sources are connected to
the projector.