Connecting your monitor – Dell IN1940MW Display User Manual

Page 20

Text mode
Original mode

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to your computer.

NOTE: If your computer supports a DVI connector, connect the white DVI cable (optional) from your monitor to your computer.

NOTE: Do not connect both the VGA and the DVI cables to the computer as all monitors ship with the VGA cable attached to the

monitor.

2. Connect either the white (digital DVI-D) or the blue (analog VGA) display cable to the corresponding video port of your computer. Do not use both cables on the same

computer. Use both the cables only when they are connected to two different computers with appropriate video systems.